Rigol DS1000Z Series Quick Guide

RIGOL
DS1000Z Quick Guide
21
bandwidth limit (e.g. ).
15. CH4 Vertical Scale
 Display the voltage value per grid of CH4 waveform
vertically.
 Use VIRTICAL
SCALE
to modify this parameter.
 The following labels will be displayed according to the
current channel setting: channel coupling (e.g.
) and
bandwidth limit (e.g.
).
16. Message Box
Display prompt messages.
17. Source1 Waveform
 Display the type of waveform currently set for Source1.
 When the modulation is enabled,
will be displayed at
the bottom of the Source1 Waveform.
 When the impedance of signal source is set to 50 Ω,
will be displayed at the bottom of the Source1
Waveform.
 Only available to DS1104Z-S and DS1074Z-S.
18. Source2 Waveform
 Display the type of waveform currently set for Source1.
 When the modulation is enabled,
will be displayed at
the bottom of the Source2 Waveform.
 When the impedance of signal source is set to 50 Ω,
will be displayed at the bottom of the Source2
Waveform.
 Only available to DS1104Z-S and DS1074Z-S.
19. Notification Area
Display system time, sound icon and USB disk icon.
 Sound Icon: when sound is enabled,
will be displayed.
Press Utility  Sound to enable or disable the sound.
 USB Disk Icon: when a USB disk is detected, will be
displayed.
20. Operation MENU
Press any softkey to activate the corresponding menu.

Rigol DS1000Z Series Specifications

General

Brand	Rigol
Model	DS1000Z Series
Category	Test Equipment
Language	English