Rigol DS6000 Series

RIGOL 6 To Make Measurements
6-26 DS6000 User’s Guide
To Clear the Measurement
If you have currently turned on one or more items in the 29 measurement
parameters, you can "Delete" or "Recover" at most 5 parameters that are turned on
last or "Delete" or "Recover" all the measurement items that have been turned on.
Note that the 5 parameters that are turned on last are determined according to the
order in which you turned them on and they will not change as you delete one or
more measurement items.
Press MEAS  Clear  Item n to "Delete" or "Recover" the specified
measurement item. When one measurement item is deleted or recovered, the
measurement result at the bottom of the screen will move one-item left or right.
Press MEAS  Clear  All Items to "Delete" or "Recover" all the measurement
items that have been turned on.
Note: Press and hold MEAS to quickly remove and recover all the measurement
items currently enabled.