RIGOL 12 Store and Recall
12-14 DS6000 User’s Guide
Chinese Input Method
For example, create a file or folder using the name "文件名".
1. Press Keyboard.
1) Use to select Chinese input method "中". Note that the "Chinese" menu
item is added in the menu items at the right of the screen.
2) Use to input the pinyin "wen". If the input is wrong, press Delete to
delete the pinyin input. After "wen" is input, a series of Chinese characters
appear in the "Chinese Chraracter Selecting Area".
3) Press Chinese and use to select and input "文".
4) Use the same method to input "件" and "名".
2. During name input, you can press Name to select the "Name Input Area" and
then press Delete to delete the characters on the left of the cursor one by one.
3. After finishing the input, press OK and the oscilloscope will create a folder or a
specified type of file with this file name under the current directory.
Pinyin Input Area Chinese Character Selecting Area Input Method Switch
Name Input Area Keyboard Upper-lower Case Switch
To Next Page
Loading...
Need help?
General
