RIGOL 1 Quick Start
1-18 DS6000 User’s Guide
synchronize two or more oscilloscope clocks.
3. Video Output
Through this interface, the oscilloscope can be connected to external monitors
such as projector to get clearer waveform display. Note that at this point, the
display of the oscilloscope is still valid.
4. LAN
Through this interface, the oscilloscope can be connected to the network for
remote control. As the oscilloscope conforms to the LXI-C instrument standard, a
test system can be built quickly.
5. USB DEVICE
Through this interface, the oscilloscope can be connected to PictBridge printer to
print waveform data or be connected to PC to control the oscilloscope through PC
software.
6. USB HOST
Through this interface, the oscilloscope can be connected to normal printer to
print waveform data or be connected to a USB storage device to perform external
storage and recall. GPIB interface communication can be realized by using the
USB-GPIB interface converter (optional) provided by RIGOL. There is also a USB
HOST interface on the front panel of the oscilloscope.
7. AC Power Socket and Power Switch
When using the AC power supply, please insert the power cord plug into the
socket vertically and use the power switch to power the oscilloscope on or off.
8. Lock Hole
Use the security lock (please buy it yourself) to lock the oscilloscope to a fixed
location via this lock hole.
To Next Page
Loading...
Need help?
General
