6. User Mode Settings 6-2. User mode setting items
- 60 -
6-2. User mode setting items
The following items can be set in user mode:
Item LCD display Details
Bump test (BUMP)
Perform a bump test (function check).
The bump test is a test for checking whether the readings are within the
acceptable range by introducing a calibration gas.
For information on the bump test procedure, see ‘7-3. Performing bump
tests’.
Calibration
(GAS CAL)
Perform air calibration and AUTO calibration.
For information on the calibration procedure, see ‘7-2. Performing
calibration’.
Calibration expiration
setting (CAL SET)
Toggle the calibration expiration ON/OFF for AUTO calibration, set the
number of days for calibration expiration, and set the operation after
calibration date expires.
*Settings available on export models only
Bump test expiration
setting
(BUMP.SET)
Set the various conditions for bump testing, toggle the bump test
expiration ON/OFF, set the bump test expiration date interval, and set
the behavior after bump test expiration.
To Next Page
Loading...
Need help?
General
