6. User Mode Settings 6-7. Confirmation beep setting (BEEP)
- 89 -
6-7-2. Beep interval setting (BEEP.INT)
Set the interval between confirmation beeps.
Set the interval to 0.5 minutes or to a value from 1 to 99 minutes. The default setting is 5 minutes.
1 Press the AIR button several times in user
mode to select [BEEP], then press the
POWER/MODE button.
2 Press the AIR button several times to select
[BEEP.INT], then press the POWER/MODE
button.
3 Press the AIR button several times to set the
interval for the confirmation beep, then press
the POWER/MODE button.
[END] appears once the settings are complete. The
display returns to the [BEEP.INT] screen.
To Next Page
Loading...
Need help?
General
