ring RDC10 User Manual

RDC20 & RDC30
1.
SUCTION CUP
Ensure glass is clean and dirt free before mounting (when removing pull rubber tab)
MOUNT CLAMP
Ensure suction cup is pressed firm against glass before clamping down (pull to release when removing
dash cam)
MINI USB SOCKET
Connect the supplied 12V power cable here
MOUNT ADJUSTMENT
Use to adjust camera angle accordingly
MAGNETIC MOUNT DOCK
Attach supplied magnetic mount here
UP / DOWN BUTTON
Use to navigate menu
MEMORY CARD SLOT
Insert MicroSD Card here
REAR CAMERA (RDCR) CONENCTION (RDC30 ONLY)
Plug rear camera (RDCR) cable into here
LOCK FILE BUTTON
Press once to lock current recording file
MIC
Records audio during video recording
MENU BUTTON / SNAPSHOT
Press once to enter dash cam settings menu (PRESS OK TO STOP RECORDING FIRST)/ during
recording press to take instant snapshot
RESET (recommend suitable size paperclip)
Use small pointy object to insert and press once to hard reset the dash cam
REC BUTTON (ALSO OK BUTTON)
Press once to start/stop recording / press once to use as OK when in menus
MODE BUTTON
Press once to switch modes
POWER BUTTON
h dh / ld d
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
6

ring RDC10 Specifications

General

Brand	ring
Model	RDC10
Category	Dash Cameras
Language	English