ring RDC10 User Manual

CONTROLS
RDC10
1.
SUCTION CUP
Ensure glass is clean and dirt free before mounting (when removing pull rubber tab)
MOUNT CLAMP
Ensure suction cup is pressed firm against glass before clamping down (pull to release when removing
dash cam)
MINI USB SOCKET
Connect the supplied 12V power cable here
MOUNT ADJUSTMENT
Use to adjust camera angle accordingly
MAGNETIC MOUNT DOCK
Attach supplied magnetic mount here
MEMORY CARD SLOT
Insert MicroSD Card here
MENU BUTTON / MODE BUTTON/ SNAPSHOT BUTTON
Press to enter dash cam settings menu (PRESS OK TO STOP RECORDING FIRST) / long press to switch
modes / during recording press to take instant snapshot
DOWN BUTTON
Use to navigate menu
REC BUTTON (ALSO WORKS AS OK BUTTON)
Press once to start/stop recording / press once to use as OK when in menus
UP BUTTON
Use to navigate menu
LOCK FILE BUTTON
Press once to lock current file
MIC
Records audio during video recording
RESET ( recommend suitable size paperclip)
Use small pointy object to insert and press once to reset the dash cam
POWER BUTTON
Press once to switch dash cam ON / Hold down to power OFF
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
5

ring RDC10 Specifications

General

Brand	ring
Model	RDC10
Category	Dash Cameras
Language	English