Need help?Do you have a question about the ring 4000 and is the answer not in the manual?
General| Brand | ring |
|---|---|
| Model | 4000 |
| Category | Dash Cameras |
| Language | English |
Observe special requirements and legislation regarding data, use, and ownership of dash cameras.
Ensure dashcam does not obscure the driver's view of the road ahead.
Use supplied adapter, clean lens correctly, avoid moisture, secure mounting, avoid airbags.
Search for RINGconnect in App Store or Google Play to get the most from your dashcamera.
Open the app, follow setup, and enable necessary settings as prompted.
Details the dashcam, quick start guide, magnetic mount, USB cable, trim tool, and window sticker.
Clean windshield, warm adhesive, position mount, and connect dashcam.
Adhesive tape on mount is single-use; choose location wisely.
Connect power cable to mount and USB charger to 12V socket; device powers on with engine.
Ensure device is off, insert card until click, press to remove.
Do not use excessive force; use a pointed device if needed for insertion or removal.
Device turns on with ignition, can be turned on manually, and off by holding the power button.
Switch on dashcam, connect to its Wi-Fi hotspot (SMARTDC4000) using password "12345678".
Position correctly on windshield along horizontal axis, aiming for 30% sky/70% road view.
Select video quality for optimum performance and set image resolution from 1-12 Megapixels.
Configure loop recording, date stamp, record audio, parking monitor, and G-sensor settings.
Protects current video file from overwriting/deletion during events.
Activated automatically by G-sensor triggers (sudden acceleration/deceleration) or collision.
Press the album button on the main screen to access the playback menu.
Navigate to Video & Image Menu and select tiles to view recorded content.
Short-press video files to enter playback menu.
Press and hold video files for 3 seconds to lock, download, share, or delete.
Short-press image files to enter playback menu.
Press and hold image files for 3 seconds to lock, download, share, or delete.
Press dropdown, select FAQs, swipe up/down to view common questions.
Press dropdown menu, select Installation Guide, then select the specific dashcam model.
Check for sufficient free space on the microSD card.
Use class 10 U1 cards, check for "wrong file" message, format card for file system errors.
Press the RESET button in the App to reboot the device when it is unresponsive.
Format microSD card via app settings if not recognized; larger cards require firmware update.
Input voltage 5V DC, 1.5A. Charging input 12-24V DC. Uses Mini USB for power.
Operating: -10°C to 60°C. Storage: -20°C to 70°C.
To Next Page
