Rinnai I Series Conversion Manual

Rinnai I-Series Boiler Conversion Manual 3
Introduction
1
This manual provides instrucons for converng gas
types on Rinnai I-Series Condensing Boilers.
For installaons in Canada, the conversion shall be
carried out in accordance with the requirements of the
provincial authories having jurisdicon and in
accordance with the requirements of the CGA-B149.1,
Natural Gas and Propane Installaon Code.
The boiler must be converted in accordance with local
codes or, in the absence of local codes, the Naonal Fuel
Gas Code, ANSI Z223.1/NFPA 54 and/or CSA B149.1,
Natural Gas and Propane Installaon Code.
To The Consumer
• Keep this manual for future reference.
• See the Safety Precauons secon in this
manual for detailed safety precauons.
• Be sure the boiler conversion is performed by a
trained and qualied professional.
Indicates a potenally hazardous situaon which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe pracces.
This is the safety alert symbol. This symbol alerts you to potenal hazards that can kill or hurt you and others.
Indicates an imminently hazardous situaon which, if not avoided, will result in
death or serious injury.
Indicates a potenally hazardous situaon which, if not avoided, could result in
death or serious injury.
DANGER
CAUTION
WARNING
To The Installer
• A trained and qualied professional must
perform the gas conversion for this boiler.
Improper gas conversion will void the warranty.
• The trained and qualied professional should
have skills such as:
− Gas line sizing
− Connecng gas lines, water lines, valves,
and electricity
− Knowledge of applicable naonal, state, and
local codes
− Training in installaon of condensing
boilers. Training on Rinnai I-Series
Condensing Boilers is accessible at
www.trainingevents.rinnai.us.
• Read all instrucons in this manual before
aempng the gas conversion. The gas
conversion must be performed according to the
exact instrucons in this manual.
• Proper gas conversion is the responsibility of
the installer.
• When gas conversion is complete:
− Complete the “For the Consumer” form in
the back of this manual.
− Leave this manual with the boiler or give
the manual directly to the consumer.
Safety Symbols
2

Rinnai I Series Specifications

General

Brand	Rinnai
Model	I Series
Category	Boiler
Language	English