To Next PageTo Next PageHow to fix Rinnai INFINITY 16 no ignition/no gas supply?
If your Rinnai Water Heater won't ignite due to a potential lack of gas supply, first, verify that the gas is turned on both at the water heater itself, and at the gas meter or cylinder.
What to do if Rinnai Water Heater water doesn't flow after a power interruption during bath fill?
If your Rinnai Water Heater experiences a power interruption while filling a bath and water doesn't flow when power is restored, turn off all hot water taps, then press the On/Off button twice.
What to do if there is a power interruption during bath fill with my Rinnai INFINITY 16?
If there's a power interruption during a bath fill and water won't flow on power reinstatement with your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
Why does my Rinnai INFINITY 16 start and then the water goes cold?
If your Rinnai Water Heater starts and then the water goes cold, verify that the power is still on. Also, try opening your hot water tap further.
What to do if power interruption during Bath fill in Rinnai INFINITY 16 Water Heater?
If a power interruption occurs during a bath fill and water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
How to fix no ignition / no gas supply on Rinnai INFINITY 16 Water Heater?
If your Rinnai Water Heater isn't igniting or has no gas supply, verify that the gas is turned on at the water heater, gas meter, or cylinder.
What to do if my Rinnai Water Heater starts then the water goes cold?
If your Rinnai Water Heater starts but the water goes cold, verify that the power is still on. Additionally, try opening your hot water tap further.
What to do if my Rinnai Water Heater has no ignition or gas supply?
If your Rinnai Water Heater has no ignition or gas supply, check that the gas is turned on at both the water heater and the gas meter or cylinder.
General| Weight | 42 lbs |
|---|---|
| Energy Factor | 0.82 |
| Minimum Flow Rate | 0.5 GPM |
| Temperature Control | Digital |
| Maximum Water Pressure | 150 PSI |
| Ignition | Electronic |
| Type | Tankless |
| Flow Rate | 16 L/min |
| Installation | Indoor |
| Gas Type | Natural Gas |
| Temperature Range | 37°C to 60°C |
| Dimensions | 571 mm x 355 mm x 194 mm |
| Maximum Flow Rate | 16 L/min |
| Gas Connection | 1/2" NPT |
| Water Connection | 3/4" NPT |
| Electrical Requirements | 120V |
| Dimensions (H x W x D) | 571 mm x 355 mm x 194 mm |
| Minimum Input | 15, 000 BTU/hr |
