Rinnai Infinity 20e - Specification

35
SPECIFICATION
Model………………………………………………..…....………………………..Infinity 20e
Installation…………………………………………...………...……. External location only
Fuel…………………………………………………..….……………...Natural Gas or LPG *
Control………………………………………………….……………...……….…..Modulating
Input……………………………………………………..……….……………....5.9 to 44.4 kW
Exhaust type………………………………………..……..Forced Draught Direct Exhaust
Ignition………………………………………………...…………….…………...…..Electronic
Burner……………………………………………………...…………………...Stainless steel
Weight…………………………………………………...……….……………..…..………16kg
Water flow rate ………………………………………..……………….…...2.4** to 20L/min
Minimum operating water pressure…………………..……….…………..……….0.8 Bar
Connections
Gas…………………………………………………………...….………………….…….3/4BSP
Water Inlet………………………………………….………...…………………….……1/2BSP
Water outlet…………………………………….………...………………………….…..1/2BSP
Electrical Supply…………………………….…………..……………….230V AC 50Hz 1ph
* Separate models available for Natural gas or LPG fuel.
** Minimum flow rate based on temperature setpoint and inlet conditions.
Rinnai are continually updating and improving products and reserve the right to
alter model specifications without prior notice.