To Next PageTo Next PageWhy Rinnai Water Heater has no ignition or gas supply?
If your Rinnai Water Heater isn't igniting or has no gas supply, verify that the gas is turned on both at the water heater itself, and at the gas meter or cylinder.
How to fix noticeable reduction in water flow in Rinnai INFINITY 32 Water Heater?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need cleaning. It is recommended to request a service call.
What to do if Heat Exchanger Outlet Sensor is Faulty in Rinnai Water Heater?
If the Heat Exchanger Outlet Sensor in your Rinnai Water Heater is faulty, it is recommended to request a service call.
What to do if Gas Modulating Valve is Faulty in Rinnai INFINITY 32 Water Heater?
If the Gas Modulating Valve in your Rinnai Water Heater is faulty, it is recommended to request a service call.
What to do if Combustion Fan Failure in Rinnai INFINITY 32?
If there is a Combustion Fan Failure in your Rinnai Water Heater, it is recommended to request a service call.
General| Type | Tankless |
|---|---|
| Gas Type | Natural Gas or Propane |
| Installation | Indoor or Outdoor |
| Energy Factor | 0.82 |
| Maximum Flow Rate | 9.8 GPM |
| Minimum Flow Rate | 0.4 GPM |
| Activation Flow Rate | 0.4 GPM |
| Ignition Type | Electronic |
| Temperature Range | 98°F to 140°F |
| Maximum BTU Input | 199, 000 BTU |
| Minimum BTU Input | 15, 000 BTU/hr |
| Venting | Direct Vent |
| Vent Material | PVC, CPVC |
| Electrical Requirements | 120V, 60Hz |
| Warranty | 12-year heat exchanger, 5-year parts, 1-year labor |
