Neo operation guide: 11907-E 05-14 | 11
A/M PWRT P
DOWN
UP
OK
Temperature display
Displays the current room
temperature.
Set temperature indicator
When the wireless controller
is on, the programmed
temperature will only be
displayed. In flame mode,
only the flame setting (F1-F7)
will display.
Time of day and day of
week
Operation mode indicator
When in flame mode, the
display will be blank.
Mode button
Toggles between auto,
manual, and flame modes.
T - Time
Initiates the time and day
of the week programming.
Press and hold for two
seconds.
UP, OK, DOWN
UP/DOWN: Changes hours, minutes, day or
temperature.
OK: Accepts the current function and advances
the next function.
P - Program
Indicates programming
mode. Press and hold for two
seconds.
Power button
PWR and OK pressed together
switches the wireless
controller on—child lock
safety feature. PWR switches
the controller off.
Flame indicator
Indicates flame height. When
in manual or auto modes, the
heater will switch off if the
room temperature reaches the
set temperature. When this
occurs, the flame indicator will
rise and fall every few seconds
to indicate the heater is still
operational.
Battery indicator
Symbol will flash when
batteries need replacing. The
wireless controller will remain
functional for approximately
five days before shutting off.
Transmit indicator
Indicates the wireless controller is transmitting to the
receiver. The symbol will appear in the LCD for one second.
Wireless controller display
To Next Page
Loading...
Need help?
General
