EasyManua.ls Logo

Rinnai RUR98i - How to use the Temperature Controller; Lock Function; Setting Priority

Rinnai RUR98i
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KBP Series Manual 67

NOTE
When the controller with priority is locked, all remote
controllers will also be locked. Any controller in this
case can be used to release the “Lock” funcon. When
all the remote controllers are “OFF”, any remote con-
troller can be used to “Lock” all remote controllers.
1.Press “LOCK” buon for 3 seconds unl “LOCK” icon
appears and controller beeps (unless beep has
been deacvated). Once locked the “LOCK” icon
will be displayed.
“LOCK”
Icon
2. Press “LOCK” buon again for 3 seconds unl
“LOCK” icon appears and controller beeps (unless
beep has been deacvated). The controller is now
unlocked and the “LOCK” icon is no longer displayed.
PRIORITY Icon
Hot Water
Temperature
Hot Water
Temperature
Lock Funcon
The “Lock” funcon will prevent the buons on the
controller from working a safeguard against small
children or otherwise inappropriate operaon.
The “Lock” funcon can be used whether the
controller is “ON” or “OFF”.
When the “Lock” funcon is acve, all other
buons are locked out except for the “LOCK”
buon.
Seng Priority
The “PRIORITY” buon is only used when there is more
than one temperature controller connected to a tank-
less water heater. Only the controller with the
“PRIORITY” icon will have the ability to change the tem-
perature so as to avoid scalding or other injury (please
note that if only 1 controller is installed, the “PRIORITY”
buon will remain lit.)
Press “PRIORITY” buon
-“Priority” icon will be displayed on the controller
allowing the hot water temperature to be
changed.
*When the controller is being powered “ON” the
controller is priorized and the “priority” display
is shown.
*When priority is selected, the set temperature of
the priorized controller becomes the set
temperature of the tankless water heater.
-Regardless of which controller has priority, all
sengs or funcons other than temperature can
be adjusted and used.
Hot Water
Temperature
Priority Icon
CIRCULATION
Icon

Table of Contents

Other manuals for Rinnai RUR98i

Related product manuals