Rinnai V Model Series User Manual

V53De Manual 25
Temperatures Available with a Controller
The water heater can deliver water at only one temperature seng at a me. The available temperatures are
provided below. A temperature lower than 115° F (46° C) can be obtained at the tap by mixing with cold water.
To change the temperature scale from Celsius to Fahrenheit or vice versa, press and hold the ON/OFF buon for
5 seconds while the water heater is OFF.
Seng Controller to Mute
On the MC-601-US to eliminate the beeps when keys are pressed or to turn the beeps back on, press and hold
both the up and down buons unl a beep is heard (approximately 5 seconds).
Locking the Controller
The MC-601-US controller can be locked by pressing the Priority buon and the up buon together for 5
seconds. A beep will sound conrming that the controller is locked. The display will alternately show “LOC”, the
temperature seng, and a diagnosc code if one has been acvated. All of the controllers in the system are
also locked.
To unlock the controller press the Priority buon and the up buon together for 5 seconds.
Temperature Sengs Available (°F)
V53De 115 120 125 130 135 140
Temp in Celsius °C 46 49 52 54 57 60
Water temperatures over 125°F (52°C) can cause severe burns or scalding. Refer to the Danger Alert on water
temperatures. Rinnai shall not, in any event, be liable for damages resulng from such misuse or misapplicaon.
These temperatures are suggesons only:
DO NOT adjust the other switches unless specically
instructed to do so.
WARNING / AVERTISSEMENT
• Kitchen 120 °F (49° C)
• Shower 98 - 110 °F (37 - 43 °C)

Rinnai V Model Series Specifications

General

Brand	Rinnai
Model	V Model Series
Category	Water Heater
Language	English