RisingHF ST Nucleo LoRa GW User Manual

V2.7 2017-09-28
www.risinghf.com
ST Nucleo LoRa GW User Guide
RisingHF
11
5.4 Commands List
Table 5-1 Command List
Command
Comment
AT
Return "+OK"
HELP
Print help information
FDEFAULT
Reset to factory default settings
RESET
Software reset gateway
SYS
Check all configurations
VER
Get version
LOG
Turn on/off packet forwarder log
ECHO
AT command echo on/off
MAC
Set/Get gateway MAC Address
IP
DHCP/STATIC IP control
DNS
Set/Get DNS address
NTP
Set/Get NTP server address
EUI
MAC Address (EUI48) to Gateway ID (EUI64) padding
LORAWAN
LoRaWAN network selection (public / private)
PKTFWD
Packet forwarder server address and port setttings
CH
Packet forwarder channels
Baudrate
AT command and logging UART interface baud rate
5.5 Error Code
Table 5-2 Error code description for AT command
ERROR
Description
-1
Command format unknown, must be one of below formats:
AT+CMD
AT+CMD?
AT+CMD=?
AT+CMD=para0,para1,para2
-2
Unknown command, the command is not supported
-3
The number of parameters is not expected
-4
Invalid parameter
-5
Illegal character received
-6
Command is too long

RisingHF ST Nucleo LoRa GW Specifications

General

Brand	RisingHF
Model	ST Nucleo LoRa GW
Category	Control Unit
Language	English