RisingHF ST Nucleo LoRa GW User Manual

V2.7 2017-09-28
www.risinghf.com
ST Nucleo LoRa GW User Guide
RisingHF
13
-> AT+IP=DHCP
-> AT+IP=STATIC,ip,netmask,gateway
DNS -- DNS record
-> AT+DNS
-> AT+DNS=dns1,dns2
NTP -- NTP server address
-> AT+NTP
-> AT+NTP=ntp_server_address
EUI -- MACADDRESS (EUI48) to EUI64 padding
-> AT+EUI
-> AT+EUI=pos0,val0_hex,pos1,val1_hex
LORAWAN -- LORAWAN Public/Private
-> AT+LORAWAN
-> AT+LORAWAN=PUBLIC
-> AT+LORAWAN=PRIVATE
PKTFWD -- Packet forwarder server address and port
-> AT+PKTFWD
-> AT+PKTFWD=address,port_up,[port_down]
CH -- Packet forwarder channels
-> AT+CH
-> AT+CH=0~7,freq,radio // Set multi SF LoRa channel
-> AT+CH=8,freq,radio,sf,bw // Set standard LoRa channel
-> AT+CH=9,freq,radio // Set FSK channel
-> AT+CH=0~9,0 // Turn off a channel
-> AT+CH=0~9,OFF // Turn off a channel
-> AT+CH=EU868|US915|EU433|CN780|AU915|AS923|KR920|CN470|IN866|CN470PREQUEL
BAUDRATE -- UART baudrate
-> AT+BAUDRATE
-> AT+BAUDRATE=new_br // MAX 4000000bps
5.6.3 FDEFAULT
Reset LoRaWAN AT modem to factory default configuration. This command will trigger the gateway
restart. Execute “AT+SYS” command to read configuration back.
Format:
AT+FDEFAULT
Return:
+FDEFAULT: OK
5.6.4 RESET
Use to reset the module. If module returns error, then reset function is invalid.
Format:
AT+RESET
Return:
+RESET: OK

RisingHF ST Nucleo LoRa GW Specifications

General

Brand	RisingHF
Model	ST Nucleo LoRa GW
Category	Control Unit
Language	English