RPR-4000
Operations manual
REV 8-21 26
Position Select: Data may be entered by first selecting a position within the data
field using the LEFT and RIGHT ARROW keys. The position selected may then
be set to the desired setting by pressing the UP ARROW (increase) or DOWN
ARROW (decrease) keys. Each depression of the UP or DOWN ARROW keys
will take immediate effect in a numeric data field.
NOTE Arrow keys can not be used to change the RR (repetition rate) setting.
Upon completion of the entry press the ENTER key to terminate data entry. A second
depression of the ENTER key will advance the cursor to the next data field.
NOTE Using this mode of data entry does not clear the data field when the first
character is entered. Only the selected position is changed.
To Next Page
Loading...