Rittal PMC12 - Battery Replacement PMC12 compact

Installation and Operation
UPS-Manual
21
EN
4.7. Battery Replacement PMC12
compact
Step 1:
Step 2:
Step 3:
Step 4:
Note!
Was the used battery of the UPS
System removed during normal
operation this will not immediately
be recognized by the PMC12
because after the startup the UPS
will check only sporadically
(approx. every 60 min.) if there is a
battery connected.
Danger!
Do not nip in the ups during a
change of batteries. Some parts
can be under voltage!