To Next PageTo Next PageWhat to do if my Rittal PMC12 is off for an unknown reason?
If your Rittal UPS is off for an unknown reason, start by checking any recorded error messages. You can also try pressing the keypad for 5 seconds until you hear the buzzer sound twice. Another step is to turn off the breaker of the utility input. Following these steps should solve the UPS lock problem.
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Frequency | 50/60 Hz |
| Form Factor | Tower |
| Communication Interfaces | USB |
| Operating Temperature | 0°C to 40°C |
Critical safety guidelines for installation, operation, and environment.
Explains UPS operating modes and how to configure the system using software.
Procedures for setting up the UPS in tower or rack-mount configurations.
Detailed steps for starting up the UPS in normal and battery modes, and operational checks.
Step-by-step guide for replacing batteries in the PMC12 UPS.
Step-by-step guide for replacing batteries in the PMC12 compact UPS.
Describes how the UPS operates on battery power during a mains outage.
Details the UPS response to overload conditions, including bypass transfer and shutdown.
Covers fault conditions such as output short circuit and inverter issues.
Provides a list of common UPS faults, check items, and solutions.
