Rittal PMC12 - 10 Technical Specifications

Technical Specifications
UPS-Manual
28
EN
10. Technical Specifications
Model 1KVA 2KVA 3KVA
VA Rating
Apparent Output Power 1000VA 2000VA 3000VA
Active Output Power
800 Watts 1600 Watts 2400 Watts
Power Factor
0,8
Topology
Double conversion On-Line
Type Rack/Tower
Agency Approvals 230V Models: CE
Input
Voltage Window 230V 120/140/160 - 288Vac
Base on load percentage (0~33/33~66/66~100%)
Low Line
Transfer
230V 120/140/160Vac
Low Line
Comeback
230V
170Vac
High Line
Transfer
230V 288Vac
Voltage
Range
High Line
Comeback
230V 278Vac
Frequency 50/60 Hz auto-select, ± 5Hz
Phase Single phase with ground
PF > 0,99 at full rated linear load
Typical Transfer Time
0 ms.
AC Leakage current 230V
≤
≤≤
≤ 3,5mA
Surge Protection
230V 300 joules
Output
Voltage 230V 230V,adjustable to 220/230/240
Voltage Regulation ≤
≤≤
≤± 1% until low battery warning
Frequency(Synchroniz
ed Range)
3Hz or 1Hz (setting by software)
Frequency(Battery
Mode)
±0,1% (0,05~0,06Hz) unless synchronized to line
Output
(INV. mode)
Current Crest Factor 3:1
Harmonic Distortion
≤ 3% THD(Linear Load)
≤ 7% THD(Non-Linear Load)
Transient
Response(ms)
≤ 60ms/5%
Efficiency
Waveform Pure Sine wave
To AC Mode (Full load)
88% 88% 90%
Efficiency
To Battery Mode (Full
load)
85% 85% 87%