Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
108
Option
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device
you want to set from the displayed list, and touch [Option].
Setup Items Setup Description
RI/VCC
You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
• GP-4100 series, GP-4*01TM, LT-4*01TM and LT-Rear Module do not have the [Option]
setting in the offline mode.
To Next Page
Loading...
Need help?
General
