Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
11
2 Selection of External Device
Select the External Device to be connected to the Display.
Setup Items Setup Description
Number of Devices/
PLCs
Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the Display.
Manufacturer
Select the manufacturer of the External Device to be connected. Select "RKC
INSTRUMENT INC.".
Series
Select the model (series) of the External Device to be connected and connection method.
Select "Temperature Controller".
In the System Configuration, check to make sure the External Device you are connecting is
supported in "Temperature Controller".
"1 System Configuration" (page 3)
Port Select the port of the Display to be connected to the External Device.
Use System Area Not available in this driver.
To Next Page
Loading...
Need help?
General
