RKC INSTRUMENT CB100 Series - Page 117

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
117
Cable Diagram 2
2A)
Display
(Connection Port)
Cable Notes
GP3000 (COM1)
GP4000
*1
(COM1)
SP5000 (COM1/2)
ST (COM1)
LT3000 (COM1)
IPC
*2
PC/AT
*1 All GP4000 models except GP-4100 Series and GP-4203T
*2 Only the COM port which can communicate by RS-232C can be used.
 IPC COM Port (page 9)
2A User-created cable
The cable length must be
15m or less.
GP-4105 (COM1) 2B User-created cable
The cable length must be
15m or less.
LT-4*01TM (COM1)
LT-Rear Module
(COM1)
2C
RJ45 RS-232C Cable (5m) by Pro-face
PFXZLMCBRJR21
The cable length must be 5m
or less.
SD(TXD)3
RD(RXD)2
SG5
SD
RD
4 ER(DTR)
SG
RS(RTS)
CS(CTS)
7
8
DR(DSR)6
FG
Shell
Display
D-Sub 9 pin (Socket)
External Device
Terminal block
Shield
Display
Pin
Signal name
Signal name