RKC INSTRUMENT CB100 Series - Page 159

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
159
Cable Diagram 8
Display
(Connection Port)
Cable Notes
GP3000
*1
(COM1)
AGP-3302B (COM2)
GP-4*01TM (COM1)
ST
*2
(COM2)
LT3000 (COM1)
IPC
*3
*1 All GP3000 models except AGP-3302B
*2 All ST models except AST-3211A and AST-3302B
*3 Only the COM port which can communicate by RS-422/485 (4 wire) can be used.
 IPC COM Port (page 9)
8A
COM port conversion adapter by Pro-face
CA3-ADPCOM-01
+
Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
User-created cable
The cable length
must be 1200m or
less.
8B User-created cable
GP3000
*4
(COM2)
*4 All GP3000 models except GP-3200 series and AGP-3302B
8C
Online adapter by Pro-face
CA4-ADPONL-01
+
Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
User-created cable
The cable length
must be 1200m or
less.
8D
Online adapter by Pro-face
CA4-ADPONL-01
+
User-created cable
GP-4106 (COM1) 8E User-created cable
The cable length
must be 1200m or
less.
GP4000
*5
(COM2)
GP-4201T (COM1)
SP5000 (COM1/2)
*5 All GP4000 models except GP-4100 series, GP-4*01TM, GP-4201T and GP-4*03T
8F
RS-422 terminal block conversion adapter by Pro-face
PFXZCBADTM1
*6
+
User-created cable
*6 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block
Conversion Adapter, refer to Cable Diagram 8A.
The cable length
must be 1200m or
less.
8B User-created cable