RKC INSTRUMENT CB700 User Manual

5. COMMUNICATION IDENTIFIER
IMCB03-E3
31
*1: The communicable identifier differs depending on the alarm type specified in alarm 2.
" : Communication is impossible # : Communication is possible
Name Iden-
tifier
Deviation
alarm
Process
alarm
LBA
*
HBA
**
SV alarm No
alarm
Current transformer
input 1
M2 " ""# ""
Alarm 2 status
AB # ### #"
Alarm 2 setting
A2 # #"" #"
Heater break alarm 1
setting
A3 " ""# ""
Control loop break
alarm setting
A5 " "#" ""
LBA deadband
A6 " "#" ""
As control loop break alarm, only either the alarm 1 or alarm 2 is specified.
*LBA: Control loop break alarm **HBA: Heater break alarm
*2: This is an identifier which enables communication when specifying to the Z-168 specification.
*3: The communicable identifier differs depending on the alarm type specified in alarm 1.
" : Communication is impossible # : Communication is possible
Name Iden-
tifier
Deviation
alarm
Process
alarm
LBA
*
SV alarm No
alarm
Alarm 1 status
AA ####"
Alarm 1 setting
A1 ##"#"
Control loop break
alarm setting
A5 ""#""
LBA deadband
A6 ""#""
As control loop break alarm, only either the alarm 1 or alarm 2 is specified.
*LBA: Control loop break alarm
*4: Any number other than "0" indicates errors (RAM write error, etc.) detected by the controller self-
diagnosis function. Contact your nearest RKC sales agent or RKC sales office.
The alarm type specified in alarm 2
The alarm type specified in alarm 1

RKC INSTRUMENT CB700 Specifications

General

Brand	RKC INSTRUMENT
Model	CB700
Category	Controller
Language	English