20 • Optional Accessories EAGLE 2 Operator’s Manual
• 10 inch probe with dust filter
Figure 13: 10 Inch Probe With Dust Filter
This probe is designed for use where drawing water or moisture into the
EAGLE 2 is not a concern. Instead of a hydrophobic filter, a cotton dust
filter is used.
• 32 inch telescoping probe with dust filter
This probe is designed for use where it is necessary to put the probe tip in
areas not accessible with the 10 inch probe with dust filter and
applications where the probe tube must be collapsible for storage.
• 7 foot telescoping probe with dust filter
This probe is designed for use where it is necessary to put the probe tip in
areas not accessible with the 32 inch telescoping probe with dust filter and
applications where the probe tube must be collapsible for storage.
See “General Parts List” on page 84 for probe ordering information.
To Next Page
Loading...
