EAGLE 2 Operator’s Manual Operation • 299
Operation
See “Measuring Mode, Normal Operation” on page 29 for operating
instructions keeping in mind that the Inert Mode oxygen alarm settings are
different.
You can access the Inert Mode Selection Screen while in Inert Mode or
Normal Mode by pressing and holding the RANGE
▼ SHIFT button.
Use the AIR ▲ YES or RANGE
▼ SHIFT button to display the mode you
wish to enter and press and release the POWER ENTER RESET button.
MODE SELECT
UP/DOWN THEN ENTER
NORMAL MODE
To Next Page
Loading...
