RKI Instruments GX-2012 - Appendix A: Sample Bag Calibration and Bump Testing; Using the Sample Bag Calibration Kit

GX-2012 Operator’s Manual Overview • 161
Appendix A: Calibrating and Bump Testing with a
Sample Bag
Overview
The GX-2012 can be calibrated and bump tested with a gas bag calibration
kit instead of a demand flow regulator kit. Appendix A describes how to use
a sample bag calibration kit to calibrate and bump test the GX-2012. A parts
list at the end of this appendix lists spare parts for the calibration kit.
Calibration/Bump Test Supplies and Equipment
Figure 29: Gas Bag Calibration Kit
Calibration Cylinder
Regulator
Gas Bag
Hose Clamp
Calibration Tubing