RMF Systems CMS 2 - 8 How to Order; Common Features

55
As a policy of continual improvement, RMF reserves the right to alter the specification without prior notice.
201.028 REV 1 Date of Issue: 18 June 2018
8 How to Order
8.1 Common Features
-All versions can be controlled by a PC, PLC or the CMS-RDU Remote Display Unit.
-Time- stamped data-logging for around 4000 tests
-An integral status LED to indicate fault conditions
-RS485/CANBUS/4-20mA communications
-Measurement in multiple international standard formats
-All units include 3m pre-wired control cable and RMF-View test analysis software. For more details see the
product brochure and the Specification.
-All units include settable upper and lower limits for the test results, with two programmable "Alarm’’ relay
outputs
-The full colour front panel LED indicator also reflects the test results, indicating if any set limits have been
exceeded. See section 6.2.2.