RMF Systems CMS 2 - 1 General Warnings and Information for the End User; General Safety Warnings

5
As a policy of continual improvement, RMF reserves the right to alter the specification without prior notice.
201.028 REV 1 Date of Issue: 18 June 2018
1 General Warnings and Information for the End User
1.1 General Safety Warnings
Do not operate, maintain or carry out any procedure before reading this manual. Any individual operating the
unit shall wear the following Personal Protective Equipment:
Protective eyewear
Safety shoes
Gloves
Overalls (or other suitable protective clothing)
Before carrying out any machine installation procedures and/or before use, one should scrupulously follow the
instructions listed in this manual. Moreover, it is necessary to comply with the current regulations related to
occupational accident prevention and safety in the workplace.
Notices aimed at the prevention of health hazards for personnel operating the machine are highlighted in this
document with signs having the following meaning:
WARNING
It relates to important information concerning the product, its use or part of this
documentation to which special attention must be paid
DANGER
It means that failure to comply with the relevant safety regulations may result in death,
serious injury or serious property damage.
In order to quickly identify the professionals concerned with reading this manual, the following definitions were
used:
OPERATOR
This is any individual whose task is to use the machine for production purposes. The
operator is aware of all the measures taken by the machine manufacturer in order to
eliminate any source of injury risk in the workplace and takes into account the
operational constraints.
PERSONNEL
INVOLVED IN
SLINGING AND
HOISTING
OPERATIONS
This is any individual whose task is to handle the machine or parts of it. Personnel
involved in slinging and hoisting operations are aware of the issues regarding the safe
transfer of machinery or parts of it and, therefore, uses appropriate lifting equipment,
following the instructions provided by the product manufacturer.
CAUTION
It means that failure to comply with the relevant safety regulations may result in mild
injury or property damage.