EasyManua.ls Logo

ROBBE Telemetry-Box - Recommended Accessories

ROBBE Telemetry-Box
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Telemetry-Box 2.4 GHz FASSTest
®
17
Vario and altimeter (TEK)
No. F1672
Precision variometer with altitude
and variometer monitoring using
two separate pressure sensors.
GPS Multi Sensor No. F1675
Multi-functional GPS vario / alti-
tude / distance / position sen-
sor for the FASSTest® telemetry
system.
Vario-Sensor No. F1712
Small, light, low-cost vario / alti-
meter for the FASSTest® teleme-
try system. back to the previous
menu. The sequence and display
unit are automatically configured
by the individual robbe-Futaba
sensor ID when the sensor is
registered (to the transmitter or to
the Telemetry-Box).
Temperature sensor 125°C No. F1713
Temperature sensor 125°C, for
the FASSTest
®
telemetry system.
The sequence and display unit are
automatically configured by the
individual robbe-Futaba sensor ID
when the sensor is registered (to
the transmitter or to the Telemetry-
Box).
Temperature range: -20…+125°C
16. RECOMMENDED ACCESSORIES
Telemetry-Box aerial adapter,
26 mm
No. F1666100
Adapter for mounting the
Telemetry-Box on the FC-18 trans-
mitter.
Gooseneck for Telemetry-
Box No. F1666200
Gooseneck for mounting the
Telemetry-Box on all transmitters
with option wells for switches, e.g.
FX-20.
Telemetry-Box bayonet
adapter No. F1666300
Adapter for mounting the
Telemetry-Box on all transmitters
with bayonet-fit aerial, e.g. T14MZ
and FX-40.