ROBBE Telemetry-Box - Control Panel Overview; ESC Button Functionality; Navigation Buttons (+;-); Enter;Activate Button (ENT)

Telemetry-Box 2.4 GHz FASSTest
®
4
5. CONTROLS
"ESC" button
LCDscreenwithbacklighting
On / Off switch
Buzzer/loudspeaker
Monitor LED
"ENT." button
"-" button
"+" button
"LINK" button
Mini-USBsocket
Earphonesocket
S-BUS2socket
The Telemetry-Box features a range of facilities and con-
nection options. These include a set of buttons for con-
trolling the display, and for setting up and programming
sensors.
"ESC" button
- Use this button in programming mode to move
backtothepreviousmenu.
-Brieypressingthe"ESC"buttonindisplaymode
activates speech output or the melody, or
switches off the sounds.
- A long press on the "ESC" button in Display mode resets
the Min. and Max. values.
"+" button
- The values are increased or switched on using the "+"
button.
- It is also used to move upwards in
programming mode.
"-" button
- The values are decreased or switched off using the "-"
button.
- It is also used to move downwards in
programming mode.
Special feature of the "+" and "-" buttons:
Holdingboththesebuttonspressedintakesyoufromthe
Display menu to the Programming menu.
"ENT." button
- This button is used to select menus and
activate parameters.
- A long press on this button in the Display menu
takesyoutotheVolumesetting.