Roberts iStream 3 - Clock and Time Settings; Automatic Clock Updates; Manual Clock Settings

12
Conguration.
Clockandtimesettings
The following instructions assume that you have just plugged in your radio
and you have just specied the language option for the menus (see page 11).
1. Rotate Tuning to highlight the desired clock format (either 12 or 24 hour)
then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu allowing
you to specify the auto-update option for the clock will be shown. The
'Update from Network' option will be best for most users.
3. Rotate Tuning to choose an auto-update option for the clock. This can
be updated from DAB or FM radio, from the Network, or not updated
automatically. The default is to auto-update from the network. If you choose
another option go to 'Connecting to your computer network' on page 13.
Otherwise you will rst need to select the correct time zone and daylight
savings setting, see the next steps. If you choose 'No update' you will need
to set the clock manually later, see page 55. Press the control to conrm
your choice.
4. Rotate Tuning to highlight the time zone for your current location. Press
Tuning to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or BST/
GMT adjustment).
Rotate Tuning to highlight 'ON' or 'OFF' as required. The asterisk shows
the current setting.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is equivalent
to Greenwich Mean Time.
6. Continue setting up your radio on the next page.
Date/Time
12/24 hour format
Auto update
Update from DAB
Update from FM
Update from Network
No update
*
UTC + 00:00: Dublin, Lond
UTC + 00:30:
UTC + 01:00: Madrid, Am
UTC + 01:30:
UTC + 02:00: Athens, Cair
UTC + 02:30:
Set timezone
*
Daylight savings
Daylight savings
DAB
30