Roberts iStream 3 - Additional Features; Line Out Socket; Inactive Standby Feature; USB Charging Socket

63
Inactive Standby feature
The Inactive Standby timer allows your radio to save power by automatically
going to Standby if no controls are used for a period of time. By default
this period is set to 8 hours but you may change it if you wish.
1. With your radio switched on, Press Menu.
2. Choose 'Main menu' and then 'System settings'.
3. Choose 'Inactive Standby' and then choose from 2, 4, 6, 8 hours
or Off.
4. Your radio will go into standby after the selected time has expired.
Setting Inactive Standby to Off will disable this feature.
Lineoutsocket(3.5mmJack)
A 3.5mm stereo Line Out socket located underneath the radio is provided
for connecting the audio signal to an external amplier. Inserting an audio
cable into this socket will not mute the internal loudspeaker. Set the volume
control on the radio to minimum if desired.
Internet / DAB / DAB+ / FM RDS / Bluetooth / USB Smart Radio
Frequency Range
WiFi : 2.4 GHz / 5GHz
FM : 87.5 - 108.0MHz
DAB / DAB+ (Band III) : Channel block 5A-13F
DC in : 12V 1.5A
Batt. : 6 x 1.5V AA / AM-3 / LR6
Roberts Radio Limited
PO Box 130, Mexborough,
South Yorkshire, S64 8YT, UK
USBsocketforsmartphoneortabletcharging
Your radio has a USB socket which can be used for charging a smartphone, tablet or
other similar devices.
Charge time may vary and in some cases may take longer to charge than when using
the manufacturers charging unit supplied with the device.
1. Ensure your radio is plugged in and powered from the mains.
2. Connect your device to the USB charging socket on the top of your radio.
3. Your device will begin to charge. Once your device has charged remove the USB
lead.
Pair
Sleep
Equaliser
Network
Time/Date
Backlight
Inactive Standby
Langauge
System settings
Off
2 hours
4 hours
6 hours
8 hours
Timeout
*
DAB
30