5. The radio will now start to search the FM
waveband and will stop when it finds a
station of sufficient strength. If the station
is of sufficient strength the
symbol will light up in the liquid crystal
display.
6. Press the Auto time set button.
7. The auto time indicator will flash in
the liquid crystal display indicating that the
radio is waiting for the RDS time signal.
When the time is set the display will briefly
show the time and the indicator will
stop flashing. If the clock does not set within
three to four minutes, the radio station may
not be transmitting clock time (CT)
information - try another radio station.
9
To Next Page
