The automatic tuning system will scan the
selected waveband and automatically store
stations in the memory presets. Up to
16stations can be stored on the FM band, 9
on the MW (AM) band and 5 on LW. note:
activating the ATS function will overwrite any
stations previously stored in the memory
presets
1. Select the required waveband by pressing
the Band button.
2. Press and hold down both the Tuning up
and Tuning down buttons until the display
shows ‘AUTO MEMO’. Your radio will scan
the selected waveband and automatically
store stations in memory presets until the
memories are full.
ATS (Automatic Tuning System)
31
To Next Page
Loading...
