Roberts RD-41 - Page 46

45
Alarm set to Once
1. Rotate the Tuning/Select control until "Once" is highlighted on
the display. Press and release the Tuning/Select control.
2. Rotate the Tuning/Select control until the date is highlighted on
the display. Press and release the Tuning/Select control to enter
date setup.
3. Rotate the Tuning/Select control to select the required date.
Press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until the hour digits are high-
lighted on the display. Press and release the Tuning/Select
control.
5. Rotate the Tuning/Select control to select the required hour.
Press and release the Tuning/Select control.
6. Rotate the Tuning/Select control until the minute digits are
highlighted on the display. Press and release the Tuning/Select
control.
7. Rotate the Tuning/Select control to select the required minute.
Press and release the Tuning/Select control.
1,2
3,4
5,6
7
continued on next page