Roberts Splash! - Recalling Preset Stations; Accessing Stored Radio Stations

19
Recalling a preset station
1. Press the On / Off button to switch on the radio.
2. Press and release the Band button to select the desired waveband.
3. Press and release the required Preset button. The display will show,
for example, 'Preset 2 Empty' if no station has been stored to that
preset. If a preset has been stored, then the display will show either
the station name (for DAB stations) or the frequency (for FM stations).
4. Your radio will tune to the chosen preset station stored in the preset
memory.
1
3
2
BBC Radio 2
Just a minute...