5
Using the fi xing brackets
The radio is supplied with a mounting bracket to allow wall mounting (for
example in a bathroom).
1. Use the bracket as a template to mark the hole positions before drilling.
Take care to ensure that there are no cables or pipes in the wall near
the hole locations.
2. Use screw fi xings appropriate to the wall type. Do not overtighten the
screws.
3. The radio may be hung on the bracket as shown.
4. The radio can be removed by lifting it off the bracket.
DAB / FM wire aerial (inside battery compartment)
1. Release the catch securing the rear battery compartment door of your
radio.
2. Take out the wire DAB / FM aerial and extend and position for the best
reception.
To Next Page
Loading...