Roberts Splash! - System Reset Procedure; Performing a Factory Reset for Troubleshooting

29
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the On / Off button to switch on your radio.
2. Press and hold the Menu button.
3. Press the Tuning Up or Down buttons until 'System' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'Factory Reset' appears
on the display. Press and release the Select button. The display will
show 'Press SELECT to confi rm reset'.
5. Press and release the Select button again to confi rm the reset operation.
6. A full reset will be performed. The station list and presets will be erased.
Sleep timer settings will be set to their default values. The display will
show 'Restarting...' and the unit will behave as when fi rst switched on
(see page 8).
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
1
3,4
3,4
3-5
2
DAB
System
System
Factory Reset
Press SELECT to
confirm reset
Restarting...