If you need any further advice, please call our Technical Helpline on 1300 556 816
1-4
Disabling alarms
1. To disable a single alarm enter the alarm setup menu (see page 59) and
rotate the Tuning/Select control until the desired alarm is highlighted
on the display. Press the Tuning/Select control.
2. Rotate the Tuning/Select control until the 'Enable:' option is highlighted
on the display.
3. Press and release the Tuning/Select control to change the status so
that the display shows 'Enable: Off'.
4. Rotate the Tuning/Select control until the 'Save' option is highlighted
on the display then press the control to save the new setting.
The chosen alarm will now be disabled.
Snooze timer
1. The radio or buzzer alarm can be silenced for 5 minutes by pressing the
Tuning/Select/Snooze control. Should you wish for a longer snooze
duration this can be extended by means of additional presses of the
control. The snooze time can be set to 5, 10, 15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown
next to the fl ashing alarm icon on the clock display.
3. In order to cancel the Snooze timer, press the On/Off button. The
display will briefl y show an 'Alarm Off' message.
62
1
Clock and Alarms
To Next Page
Loading...
