15
INSTALLER SETUP
Settings Display Adjustment Options Default
12 or 24
Hour Clock
Select a 12 or 24 hour clock setting.
Use or to select
12 or 24 hour clock.
12 Hour
Clock
Fan
Operation
Select GAS or ELEC depending on
the type of furnace.
GAS or ELEC
GAS
Morning
Recovery
This setting will start heating early
to bring the building temperature
to its programmed set-point by the
beginning of the WAKE time period.
Use or
to turn ON or OFF.
ON
Display
Light
The display light can be congured
to come on when any key is pressed
or to stay on all of the time.
AUTO - Any key ON
ON - Always ON
AUTO
Contractor
Call Number
The thermostat allows
installers to put their phone
number in the display.
If selected ON, the input screen will
appear after pressing NEXT STEP.
Use or key to select the
desired telephone number and the
FAN or SYSTEM key to change
characters.
OFF
To Next Page
Loading...
