Robertshaw RS9110 User Manual

Set Program Schedule 5+1+1 or 7 Day
To customize your program schedule, follow these steps:
1. Select HEAT or COOL with the system switch. Note: Youhave to program
heat and cool separately.
2. Press the MENU button (If menu does not appear rst press RUN SCHED).
3. Press SET SCHED. Note: Monday-Friday (or Monday ifin7Day) is
displayed and the WAKE icon is shown. You are now programmingthe
wake time period for that day.
4. Time is ashing. Use the or key to make your time selection for
that day’s WAKE time period.
5. Press NEXT STEP.
6. The setpoint temperature is ashing. Use the or keytomake
your setpoint selection for that day’s WAKE timeperiod.
7. Press NEXT STEP.
8. Repeat steps 4 thru 7 for that day’s LEAVE time period,
RETURNtimeperiod, and SLEEP time period.
Continued on next page...
PROGRAMMING
9

Robertshaw RS9110 Specifications

General

Brand	Robertshaw
Model	RS9110
Category	Thermostat
Language	English