Robertshaw Smart Sense Series User Manual

52
SPECIFICATIONS
InputVoltage 24VAC50/60Hz+/-15%
RelayRang 24VAC@1Ampmaximumperrelay
OperangTemperature 32to122ºF (0 to 50ºC)
OperangRH 0-95%(noncondensing)
StorageTemperature 32to150ºF (0 to 65ºC)
Size 4.5"x4"x1"(113x103x23mm)
DisplaySize 2.9"x2.2"(74x55mm)
TemperatureSensor(s) NTCtype3-10KΩinONposion/20KΩin 
 OFFposion
AccuracyinONposion +/-3ºFdegrees@77ºF
(+/- 0.3 ºCdegrees@25ºC)
AccuracyinOFFposion +/-3ºFdegrees@34ºF
(+/- 0.3 ºCdegrees@1ºC)
StageDelays Minimumtemperaturechangeoverme 
method
Timed Upstage Delay 5 - 90 minutes
An-CycleDelay Oto4minutes
MaximumHourlyCycles Unlimited,30,10or6(Installerset)
DisplayResoluon 1ºF degree (0.5 ºC degrees)
Control Range OFF to 100ºF(38ºC)
OutsideAirTempDisplayRange 17to140ºF(-8to+60ºC)
Backlight Blue
BacklightLife 3,000hourstohalfbrightness

Robertshaw Smart Sense Series Specifications

General

Power Source	Battery, Hardwired
Programmability	7-Day
Features	Filter Change Reminder
System Switching	Manual
Compatibility	Heat Pump Systems
Temperature Range	40°F - 90°F
Type	Programmable Thermostat