Robin EH12 Service Manual

I Step I Part to remove 1 Procedures
I
Remarks
~~
3
(I) Remove recoil from blower housing. Recoil starter
M6 X8mm flange bolt -.a- 4pcs.
4
M6X I2mm flange bolt -e -. 4pcs.
housing
(I ) Remove blower housing from crankcase.
Blower
5
(1) Remove oil sensor probe. Be careful not Oil scnsor
(Option)
to damage stick and sensor since these are
sensitive
and an erratic operation may
result.
Tool
lOmm box wrench
lOmm box wrench
Fig. 5-4
- 18-

Robin EH12 Specifications

General

Ignition System	Transistorized magneto ignition
Starting System	Recoil starter
Bore x Stroke	60 mm (2.36 in) x 43 mm (1.69 in)
Max Output	3.6 kW (4.8 HP) at 3, 600 rpm
Engine Type	4-Cycle, Air cooled, Single cylinder, OHV