Robin EH12 - Page 24

Step
a
Part to remove
Control box
and Electric
starter
(Option)
Procedures
(I ) Disconnect wires.
blue
1 (diode rectifier )
light blue I (diode rectifier )
black I (magnetic switch)
(2) Remove black wires from electric starter.
(3) Remove control box.
(4) Loosen two flange bolts and remove
electric starter.
M8 flange bolt 2pcs.
M8 FLANGE BOLT : 2 pcs.
\ /’
,/
ELECTRIC STARTER
Remarks Tool
Fastened together with
fuel tank.
12mm socket wrench
Fig. 5-6
- 20 -