7. Using The Power Box
7.1 Power Box Alerts
Event Description
Docking Indicator is lit. The mower is in its Base Station.
Operating Indicator is lit The mower is not in its Base Station.
Program On/Off Indicator is
lit.
‘OFF’ will be displayed on the
mower.
Automatic Operation is paused.
Wire Indicator – Flashes and
Beeps
The Perimeter Wire is cut,
disconnected, or too long.
All Indicators ash
The mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
All Indicators ash and Buzzer
sounds for 10
seconds.
The Anti-Theft option is set to On,
and the mower was removed from
its Base Station when it was not
scheduled to operate.
Note – To stop an alert when sounding, press the On/Off Button.
7.2 Turn the Buzzer On/O
• Press and hold the On/Off button for 10 seconds.
- A short beep indicates On.
- A ash indicates Off.
7.3 Enable/Disable the Automac Operaon
• This option is used to disable (pause) a predened Automatic Operation (Program) of Robomow. This
option does not prevent Manual Operation (Section 6.3).
• Press and hold the Program On/Off button for 2 seconds.
A red LED will be lit on the Power Box. ‘OFF’ indication will be displayed on the mower:
o If Robomow is currently in the process of mowing:
- Robomow will complete the current mowing cycle.
- After completing the current mowing cycle, Robomow will stay in the Base Station and will not start
another mowing cycle.
• To Enable the Automatic Operation
o Press and hold the Program On/Off button for 2 seconds.
o Use P021 menu in Advanced Settings (see Section 6.4.2 for more details).
Docking Indicator On/Off Button
Operating Indicator Wire Indicator
To Next Page
Loading...
Need help?
General
Weight and Dimensions
