Roborock G10 - Filter and Mop Care

13
Routine Maintenance
Clean the main wheel with a soft,
dry cloth.
Main Wheel
1. Remove the dustbin.
Dustbin
2. Open the dustbin cover
and empty the dustbin.
3. Fill the dustbin with clean
water and close the cover.
Gently shake the dustbin, and
then pour out the dirty water.
To prevent blockage, only use clean water without
any cleaning liquid.
Note:
4. Leave the dustbin and the washable filter to dry.
2. Rinse the filter repeatedly and tap it
to remove as much dirt as possible.
Washable Filter
1. Open the filter cover and remove
the filter.
3. Allow 24 hours for the filter to dry
thoroughly and reinstall it.
Notes:
• Make sure that the filter is completely dry before use.
• Purchase an additional filter and alternate if necessary.
Do not touch the surface of the filter with your hands, brush, or hard objects to avoid
potential damage.
Note:
VibraRise Mop
1. Remove the mop from the
mop mount.
2. Clean the mop and air-dry it.
3. Slide the mop cloth in from the
opening of the attachment slot
then stick it flat in place.
A dirty mop will affect the washing performance.
Clean it before use.
Note: